11
BIOS Setup
2 -
BIOS Setup
other will remain “0”. “None”
means no any ATAPI and
IDE hard disk device is in the
channel.
Access Mode
CHS
LBA
Large
Auto (
Default)
Mode “
CHS
” if for IDE hard
disk is smaller than 528MB;
Mode ”
LBA
” is for IDE hard
disk over 528MB that
supports the function of
Logical Block
Addressing
(LBA); Mode ”
Large
” is for
IDE hard disk over 528MB
that does not support LBA
and uncommon. It can be
only used with MS-DOS.
If operating system is SCO
UNIX, the mode need to set
to “Normal”.
Capacity
The capacity of hard disk in
this channel. Please refer to
the document of the hard
disk in this channel.
Cylinder
Min=0
Max=65535
Set the number of cylinders
for the hard disk. Please
refer to the document of the
hard disk in this channel.
Head
Min=0
Max=255
Set the number of read/write
heads. Please refer to the
document of the hard disk in
this channel.
Precomp
Min=0
Max=65535
Please refer to the document
of the hard disk in this
channel.