3. Cleaning the water tank
Cut off the power supply; take the air filter screen down, and then
remove the water tank. Remove the dirt in the tank by using a wet
towel with a mild detergent, After that, wash and rinse it with clean
water, wipe it with a dry piece of cloth,
4. Cleaning the outer cover
Clean the outer cover with a mild detergent and a piece of soft cloth.
★★★
Attention:
Disconnect the power supply before cleaning the fan.
Control panel must not get wet.
VI. Usage of Ice packs
The ice pack has a special property of making the water cooler and
can absorb the heat from water to keep the water temperature below
the environmental temperature (8
℃
lower more or less) for several
hours and make the air flow cooler.
1.
Ensure that the ice pack is filled with water, but no more than
two-thirds full.
2.
Put the ice pack into the refrigerator and make sure it is frozen
thoroughly.
3.
Put the ice pack into the water tank. Minutes later, the water
temperature inside the tank will approximately be 8
℃
lower than the
environmental temperature.
4.
The fan is equipped with two ice packs.
