0
Use
And Care Instructions
h4)-%2h+%9
hh+%9
h,)'(4h+%9
hh+%9
$)30,!9
#HARCOAL'REASEFILTER
1 2 3
#HARCOAL'REASEFILTER
1 2 3
hh
+%9
hh
+%9
h4)-%2h+%9
h,)'(4h+%9
$)30,!9
Control and features
This hood is equipped with an electronic motor and lamp control. The control is able to set 3 different fan speeds,
turn ON/OFF light and has a timer function. In the following drawing are described the main key functions.
1.
Timer Key
o
The default timer setting is 10 minutes, and it can be adjusted between 20 minutes and 1
minute.
o
After pressing the timer key, the control enters to a timer setup mode, and user can adjust the
timer countdown time with the “-” and “+” keys within 5 seconds. The timer can be initiated
immediately pressing the timer key, after setting the timer duration or pressing the timer key
twice (default 10 minutes setting).
o
If not action occurs within 5 seconds the countdown will start.
o
During the timer setup the “-” and “+” keys are dedicated to the timer and no motor action will
occur.
o
Once initiated the timer, it can be cancelled by pressing the timer key again.
.
Light Key
o
Press lamp key to turn ON the light (Lamp state previously OFF).
o
Press lamp key to turn OFF the light (Lamp state previously ON).
.
Display
Shows the hood settings.
.
“-” Key. Speed Decrease / OFF
o
This key is used to decrease the fan speed, or turn OFF the fan.
o
The fan will turn OFF if the “-” key is pressed and the hood was in the first speed.
o
If the fan is at second speed and the “-” key is pressed, the fan will be set to first speed.
o
If the fan is at third speed and the “-” key is pressed, the fan will be set to second speed.
o
If the fan is OFF and the “-” key is pressed, the control backlight will light up.
5.
“+” Key. Speed Increase / ON
o
This key is used to increase the fan speed, or turn ON the fan.
o
The fan will turn ON if the “+” key is pressed and the hood was OFF.
o
If the fan is at first speed and the “+” key is pressed, the fan will be set to second speed.
o
If the fan is at second speed and the “+” key is pressed, the fan will be set to third speed.
o
If the fan is at third speed and the “+” key is pressed, a beep will sound.
