ARIETE 2878, Manual

Page: 12 / 73

12
EN
in operation. In particular, pay attention to the release of steam when opening
the lid.
• Place the appliance on a flat, stable surface, easily accessible and easy to
clean. The appliance must not slip or tilt. Lay the power cable properly so as to
avoid any danger of tripping. Make sure the power cable does not hang down
from the supporting surface in order to avoid it from being pulled causing the
appliance to fall to the ground.
WARNING – material damage
• Respect the MIN and MAX marks inside the container. The sleeve in the bot -
tom of the container must be covered by milk. In case of insufficient amount
of milk, the appliance may overheat. In case of excessive amount, milk can
instead overflow.
• Before removing the container from the base, make sure that the heating and
foaming process is completed and/or the appliance is off. Place the appliance
at a sufficient distance from heat sources, such as. electric cooking plates or
stoves.
• For cleaning do not use any chemical, abrasive or aggressive detergent.
• The appliance and its accessories are not suitable for dishwashers.
• Use only original accessories.
• It cannot be fully excluded out that certain types of paint, plastic or furniture
detergents may attack and soften the non-slip feet material. To avoid the
formation of undesirable marks on the furniture, put possibly a non-slip base
under the appliance.
• For proper disposal of the product pursuant to the European Directive
2012/19/EC please read the relevant leaflet enclosed with the product.
• Use only original accessories.
• SAVE THESE INSTRUCTIONS FOR FUTURE REFE-
RENCE.
The quantity and quality of the foam depend on many factors, including the milk fat content,
the use of fresh or long-life milk, the milk temperature and brand.
To avoid that milk froths excessively, if you are using a new type of milk do not immediately
fill the container up to the MAX mark, but first make a test with a smaller amount. If milk
should spill, immediately turn off the appliance. Wait until it cools a little, then clean it (see
“Cleaning”chapter). We got the best results with semi-skimmed milk (1.5% fat).