ARIETE 00S623610AR0, Manual

Page: 10 / 67

10
EN
•
The appliance is not to be used if it has been dropped, if there
are visible sign of damage or if it is leaking. Do not use the ap-
pliance if the power cord or the plug are damaged, or if the ap-
pliance is faulty. To prevent any accident, all repairs, including
the replacement of the power cord, must be carried out by an
Authorised Service Centre or, in any case, by qualified person-
nel.
• Fill up the tank with water before starting up the appliance. Be sure to unplug the appliance before pouring water into the
tank.
• Avoid putting excessive quantities of water into the tank.
• When filling the water tank, always use the measuring cup (P) provided. Never put the iron directly underneath the tap.
• Close the cover after filling, making sure that it is perfectly closed.
• Choose a sufficiently well lit and clean environment, with an easily accessible electric socket.
• During use, rest the appliance onto a horizontal surface.
• Turn on the appliance only when it is in working position.
• The appliance may give out a little smoke when used for the first time; This transitory effect is perfectly normal and is due
to the fact that some of components have been slightly lubricated.
• Never leave the appliance unattended when it is connected to the power supply.
• The appliance must be used and rested on a stable surface.
• When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
• When you must be away even for a short time, turn off the iron, put it on his iron rest and always unplug the power cord
from the outlet.
• Do not use the appliance if the power cord appears to be damaged, with parts bearing burns, etc.; an authorised Ariete
service centre must repair and replace the power cable; under penalty of the warranty being forfeited.
Warning of burns
• Never try to iron garments being worn.
• If you press the steam button before the iron is hot, it is possible that hot water comes out from the steam holes.
• Do not touch the metal parts of the iron when in operation and for several minutes after it is turned off since it could cause
burns.
• Do not aim the jet of steam towards parts of the body or pets.
Warning – material damage
•
Place the appliance on a stable surface where it can not tip
over.
•
Place the appliance on a work surface that bears a temperature
of at least 90°C. Do not place on delicate surfaces.
• Remove any labels and protections from the soleplate before using the appliance for the first time.
• Always unwind the power cord before use.
• Using the appliance with no water in the tank may damage the pump.
• The use of extensions not approved by the manufacturer can result in damage to property and personal injury.
• Do not use sparkling (carbonated) water. If your water supply is very hard, we suggest you use demineralised water
instead.
• Do not place the iron on top of the power cord when it is hot.
• Do not bend the power cord protection when it is wrapped around the iron: the cord could break with time.
• Do not pull the power cord to unplug the appliance.
• The appliance must only be cleaned with a soft, slightly damped, cloth after unplugging the iron and allowing all its parts
to cool down. Never use solvents which may damage the plastic parts.
• Do not wrap the power cord around the soleplate when the iron is hot.
• Do not put the soleplate in contact with metal surfaces.
• Do not pour vinegar, descalers or other scented substances into the tank; Otherwise, the warranty may be revoked.