PAGE 1 • S223015-2-INS-RA • 800.798.0813 • NEED ASSISTANCE?
•
ARIESAUTOMOTIVE.COM
Product Image
Brackets
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To protect the product, wax after installing. Regular waxing is recommended to
add a protective layer over the finish. Do not use any type of polish or wax that may
contain abrasives that could damage the finish.
For stainless steel and aluminum, polish may be used to clear small scratches
and scuffs on the finish. Mild soap may be used also to clean the product.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Level of Difficulty
Easy
Tools Required
Ratchet
Torque wrench
Tape measure
Wrench, 17mm
Socket, 17mm
Level
Scan
for helpful
install tips
Front
Rear
INSTALLATION MANUAL
S223015-2
Torque Specifications
M
E
T
RIC
M6 bolt
3 ft.-lbs.
M8 bolt
7 ft.-lbs.
M10 bolt
16 ft.-lbs.
M12 bolt
28 ft.-lbs.
SA
E
1/4" bolt
3 ft.-lbs.
5/16" bolt
7 ft.-lbs.
3/8" bolt
16 ft.-lbs.
7/16" bolt
20 ft.-lbs.
1/2" bolt
28 ft.-lbs.
Use above torque setting
unless otherwise noted
Parts List
1
Driver / left side bar
1
Passenger / right side bar
1
Driver / left front bracket
1
Passenger / right front bracket
1
Driver / left rear bracket
1
Passenger / right rear bracket
24
Hex bolt, M10 x 35mm
8
Hex nut, M10
24
Flat washer,
M10 x 30mm OD x 1.5mm
8
Flat washer,
M10 x 22mm OD x 2mm
24
Lock washer, M10
8
Clip nut, M10
