ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
P2066-INS-RB
•
PAGE 1
INSTALLATION MANUAL
P2066
Torque Specifications
M
et
ric
M6 bolt
3 ft-lbs.
M8 bolt
7 ft-lbs.
M10 bolt
16 ft-lbs.
M12 bolt
28 ft-lbs.
SA
E
1/4" bolt
3 ft-lbs.
5/16" bolt
7 ft-lbs.
3/8" bolt
16 ft-lbs.
7/16" bolt
20 ft-lbs.
1/2" bolt
28 ft-lbs.
Use above torque setting unless otherwise noted
Tools Required
Socket set
Wrench
Level of Difficulty
Easy
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To protect the product, wax after installing. Regular waxing is recommended
to add a protective layer over the finish. Do not use any type of polish or wax
that may contain abrasives that could damage the finish.
For polished, gloss and other smooth finishes,
polish may be used to clear small scratches and scuffs on the finish.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Refer to the last page of this manual for warranty and product registration information.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Product Photo
Brackets and Hardware
Parts List
1
Grille guard
1
Driver / left frame
mounting bracket
1
Passenger / right frame
mounting bracket
2
Top mounting brackets,
2015-on only
1
Wrench, S=4
1
Wrench, S=5
2
Button head screw, 8mm x 20mm
2
Button head screw, 8mm x 25mm
4
Lock nut, 8mm
2
Lock washer, 8mm
10 Flat washer, 8mm
2
Hex bolt, 8mm
4
Lock washer, 10mm
8
Flat washer, 10mm
4
Hex nut, 10mm
4
Hex bolt, 10mm
2
Clip nut, 8mm
