ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
2165102-INS-RA
•
PAGE 4
Step 9
Disconnect the supplied switch from the wire
harness and install in desired location.
With the switch installed, route the wire
harness to the LED lights and the switch.
Reconnect the blue, red and black spade
connectors to the switch, as shown.
Note:
The black wire connects
to the gold switch terminal.
Plug the male connector on
the wire harness into the female
connector attached to the LED lights.
Step 10
Connect the red fused wire with the ring
terminal to the positive battery post.
Connect the black wire ring terminal
to the negative battery post or other
suitable vehicle grounding point.
Mount the supplied relay to the vehicle
and secure all wires with zip ties away
from any moving parts to avoid damage.
Test the lights to ensure proper function.
Step 11
Congratulations on the installation of
your new ARIES AdvantEDGE
™
bull bar.
With the bull bar installed, periodic
inspections should be performed to ensure
all mounting hardware remains tight.
To protect your investment, see the
'Notes and Maintenance' section on
the first page of this instruction manual.
