ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE? • 877.287.8634 • RD • PAGE 2
Step 1A - Vehicles without tow hooks
For vehicles with tow hooks,
skip to Step 2A.
Locate the two mounting points on
the front end of the vehicle. Locate
the driver-side mounting point.
Step 1B - Vehicles without tow hooks
Place the mounting bracket up to the
vehicle. Insert the double bolt plate into
the side with two holes.
Step 1C - Vehicles without tow hooks
Secure the double bolt plate using
two M10 flat washers, two M10
lock washers and two M10 hex nuts.
Snug the hardware,
but do not fully tighten.
Step 1D - Vehicles without tow hooks
Insert a single bolt plate into the
opposite side of the mounting point.
Secure the single bolt plate using
a M10 flat washer, M10 lock washer and
M10 hex nut. Snug the hardware,
but do not fully tighten.
Repeat steps 1A through 1D to attach
the passenger-side mounting bracket.
