ARIES INDUSTRIES CT1750, Operation And Maintenance Manual

Page: 12 / 75

970262_A Aries Industries, Inc. ▪ (800) 234-7205 ▪ www.ariesindustries.com Page 11
Electric Wolverine
Section One
Operation and Maintenance
Wolverine Electric Reel Cable (cont’d)
end of the cable (slip ring side) and the wires. If the wire path is still broken, remove another 3
feet. Continue this process until the wire path is clear, or order a new cable (P/N 380693).
If the customer has not been trained to do a repair or wishes not to do the repair themselves,
see the Returning Equipment section for information on sending the truck in for repair.
Equipment Selection Switch
The Electric Wolverine cutter tractor equipment selection switch can be found on the rack
panel of the CC1750. The detection switch must be on large robot. Air must also be supplied to
the reel from the control panel.
See the Wolverine Quick Start Guide (P/N 970245) for pictures and step by step instructions of
how to turn on the Electric Wolverine system and what the correct settings are. Operation of
the Electric Wolverine cutter tractor can also be found in the Wolverine Quick Start Guide (P/N
970245) or in the Operation section of this manual.
Components
The components section is to list the standard equipment that come with the Electric
Wolverine cutter tractor, along with options available for the Electric Wolverine cutter tractor.
Standard
A standard Electric Wolverine cutter is factory configured with four 6” Pipe tires (P/N 380111).
Use these tires with the DN150 6” Pipe ID Top Clamp Kit (P/N 380658) when inspecting non-
relined 6” pipes. The Electric Wolverine cutter tractor uses clevises instead of the traditional
tow cables. There will be two clevises (P/N 380090) supplied with the cutter tractor.
The standard Electric Wolverine cutter tractor comes with the LED Camera Kit (P/N 380001),
Carbide and Rubber Wheel Set (P/N 380204), an electric motor (P/N 380290), a case assembly
(P/N 460132), a wooden box with foam (P/N 460161), a spare parts kit (P/N 950637), and a
manuals (P/N 970209).
The standard Electric Wolverine cutter tractor and manual are all packaged and shipped in a
wooden box (P/N 460161), designed to withstand rugged treatment. Aries recommends using
the box to store the Electric Wolverine when not in use. The shipping box should also be used if
it is ever necessary to return the Electric Wolverine cutter tractor to Aries for repair.