manualshive.com logo in svg

Ariens Sno-Thro 938000, Owner'S/Operator'S Manual, Page: 20 / 24

Share
Download
Ariens Sno-Thro 938000 Owner'S/Operator'S Manual Download Page 20

GB - 20

TROUBLESHOOTING

PROBLEM

PROBABLE CAUSE

CORRECTION

Engine will 
not 
crank/start

1. Key not in RUN position.
2. Fuel tank empty.
3. Clogged fuel filter.

4. Faulty electric starter or wire 

connections.

1. Turn key to RUN position.
2. Fill fuel tank.
3. Replace fuel filter. See Engine 

Manual.

4. Contact your Ariens Dealer.

Engine 
stops

1. Out of fuel.

2. Improperly mixed or contaminated 

fuel.

3. Faulty spark plug.

4. Clogged fuel filter. 

1. Fill fuel tank (see Filling Fuel Tank 

on page 13).

2. Drain fuel tank and refill with new 

fuel/oil mixture (see Filling Fuel 
Tank on page 13).

3. Replace spark plug. See Engine 

Manual.

4. Replace fuel filter. See Engine 

Manual.

Discharge 
chute will 
not turn

1. Discharge chute gears are frozen. 

1. Move unit to a warm area to thaw.

Auger will 
not turn or 
throw snow

1. Auger is frozen.
2. Ice or debris is obstructing auger.

3. Auger control cable out of 

adjustment.

4. Drive belt slipping.

1. Move unit to a warm area to thaw.
2. With engine off, and auger 

disengaged, remove obstructions.

3. Adjust drive belt (see Drive Belt 

Adjustment on page 17).

4. Adjust drive belt. See (see Drive 

Belt Adjustment on page 17).

ACCESSORIES

See your authorized Ariens dealer to add 
the additional accessories available to your 
Sno-Thro.

73800300

Discharge Chute Crank Kit 
(938019)

73800100

Electric Starter Kit (938019)

SERVICE PARTS

Order the following parts through your 
Dealer:

Part no.

Qty

Description

07236300

1

Drive Belt

03813800

1

Scraper Blade

02910800

1

Fuel Filter

Summary of Contents for Sno-Thro 938000

























Reviews:

No comments