EN - 24
SHORT TERM
1. Run auger / impeller for a few minutes to
remove loose or melting snow to prevent
impeller from freezing.
2. Tighten all hardware to correct
specifications.
3. Inspect unit for visible signs of wear or
damage. Repair as needed.
4. Apply a light layer of oil or anti-rust
compound on bare metal areas.
5. Prepare fuel system for storage.
NOTICE:
Ariens recommends using a quality
fuel stabilizer in all fuel. For the best
effectiveness, add stabilizer to all fuel
containers whenever purchasing fuel. Add
the stabilizer to the container before adding
fuel.
a. Add Ariens fuel stabilizer (see
on page 14) or equivalent
according to manufacturer's
instructions to the fuel tank and any
fuel containers with remaining fuel.
6. Turn engine key to stop position and
remove key.
7. Perform battery and charger
maintenance. See
8. Store unit in a cool, dry, protected area.
Do not store unit outdoors.
LONG TERM
1. Perform all short-term storage items.
2. Wash salt and other corrosive ice-melting
agent residue from unit with mild soap
and low-pressure water.
IMPORTANT:
Never spray unit with high-
pressure water.
3. Lubricate as directed in
on
4. Touch up all scratched painted surfaces.
5. Remove weight from wheels by putting
blocks under frame or axle.
6. Store unit in a cool, dry, protected area.
Do not store unit outdoors.
START-OF-SEASON FUEL
PREPARATION
Before starting unit for the first time after long-
term storage, add fresh, stabilizer-treated fuel
to the fuel tank and any fuel containers with
remaining fuel.
See your Ariens dealer for a complete list of
compatible accessories and attachments for
your unit.
STORAGE
WARNING:
AVOID INJURY.
Read and understand the
section before proceeding.
ACCESSORIES
Description
Part No.
Front Weight Kit
72406500
Tire Chain Set
72601800
Composite Skid Shoes
72600300
Cover
72601500
Snow Cab
72102600
Summary of Contents for Professional Sno-Thro Series
Page 31: ......
