EN – 65
See Figure 157.
11. Remove hardware retaining bearing(s) and remove
bearing(s).
IMPORTANT:
Bearing plate is not a wear item and does
not need to be replaced unless damaged.
Install Left Bearing
IMPORTANT:
Bearing plates are ONLY installed with
bearing on frame. Bearing plates are NOT installed with
bearing on carriage.
1.
Secure each bearing to frame and / or carriage with
three hex bolts and three locking nuts.
2.
Reinstall sleeve bushing between bearings.
See Figure 158 and Figure 159.
3.
Insert stepped-down end of long axle through
carriage, frame and into differential gear.
4.
Models 926060, 926069, 926338:
Reinstall hub onto
each axle end.
Model 926337:
Reinstall one flat steel washer onto
each axle end.
5.
Reinstall E-ring onto right axle end.
6.
Tighten hardware securing mount plates to track
carriage.
7.
Reinstall bottom cover and secure with two tapping
screws and four hex bolts.
Figure 156
Models 926060, 926069, 926338
1. Axle Mount Plate
2. Sleeve Bushing
3. Bearing
Figure 157
1. Bearing
2. Bearing Plate
Figure 158
Models 926060, 926069, 926338
Figure 159
Model 926337
