Ariens Edge 34, Operator'S Manual

Page: 21 / 30

EN - 19
TROUBLESHOOTING
Problem Probable Cause Correction
Engine does
not start.
Safety Interlock System is not
engaged or is faulty. Check Safety Interlock System. See
Check Safety Interlock System on
page 16.
Fuel tank is empty. Fill fuel tank. See Before Operating Unit
on page 12.
Fuel supply is contaminated. Replace with clean fuel.
Battery is discharged. Charge battery. Refer to your unit’s
Service Manual.
Connection between battery and
battery cables is poor. Tighten and/or clean battery and battery
cables. See
Clean Battery on page 17.
Spark plug wire(s) are loose or
spark plug(s) are faulty. Connect spark plug wire(s) or replace
spark plug(s). Refer to engine manual.
Electrical system is faulty. Contact your Ariens dealer.
Engine is faulty. Contact your Ariens dealer.
Engine runs
rough.
Choke is in the on position. Move choke to the off position.
Air filter cartridge is plugged. Clean or replace air filter cartridge. Refer
to engine manual.
Engine is faulty. Contact your Ariens dealer.
Engine
overheats.
Engine oil level is low. Add engine oil. Refer to engine manual.
Cooling fins are plugged. Clean engine. Refer to engine manual.
Engine is faulty. Contact your Ariens dealer.
Unit does not
drive.
The transaxles are bypassed. Engage levers. See Move Unit Manually
on page 13.
Transaxle drive belt is faulty. Contact your Ariens dealer.
Transaxles are faulty. Contact your Ariens dealer.
PTO
malfunctions.
Operator presence switch is not
engaged. Activate switch by sitting on operator
seat.
Operator presence switch is
faulty. Contact your Ariens dealer.
PTO belt is faulty. Replace belt. Refer to your unit’s Service
Manual.
PTO switch, wiring, connectors
or clutch are faulty. Contact your Ariens dealer.
Unit moves
with engine off
and parking
brake engaged. Parking brake needs adjustment. Adjust parking brake lever. Refer to your
unit’s Service Manual.
Parking brake is faulty. Contact your Ariens dealer.
Unit does not
drive straight.
Tire pressure is incorrect. Check tire pressure. See Specifications
on page 22.
Steering levers need adjustment. Refer to your unit’s Service Manual.
Unit creeps
when steering
levers are in
neutral
position. Transmission and/or linkage
need adjustment. Contact your Ariens dealer.