Step One:
(Connect Headlight Wire Harness)
NOTE:
The headlight wire harness comes attached to the upper
handlebar assembly.
1.
Route the wire harness along the interior of the right side
handlebar.
2.
Connect to the engine electrical plug.
3.
Press cable anchor into mounting hole in the frame near the
engine electrical plug.
4.
Secure the wire harness to the handlebars using the cable
ties attached to the wire harness.
5.
Gather excess wire harness length and fasten together with
cable tie included in literature pack.
NOTE: This slide applies to
UNATTACHED handlebars ONLY
