Ariens 939001  ST520E Owner'S/Operator'S Manual Download Page 2

GB - 2

SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

ASSEMBLY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

CONTROLS AND FEATURES  . . . . . . . . . . . . . . . . 9

OPERATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . 13

SERVICE AND ADJUSTMENTS . . . . . . . . . . . . . . 15

STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

SERVICE PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . 20

ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . 21

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . 22

WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

THE MANUAL

Before operation of unit, carefully and completely read 
your manuals. If used improperly, this unit could be 
dangerous and cause personal injury or property 
damage. The contents will provide you with safety 
instructions for the safe use of your unit during normal 
operation and maintenance.

All reference to left, right, front, or rear are given from 
operator standing in operation position and facing the 
direction of forward travel.

MODEL AND SERIAL NUMBERS

When ordering replacement parts or making service 
inquiries, know the Model and Serial numbers of your 
unit and engine.

Numbers are located on the product registration form in 
the unit literature package. They are printed on a serial 
number label, located on the frame of your unit.

Record Unit Model and Serial numbers here.

Record Engine Model and Serial number here.

PRODUCT REGISTRATION

The Ariens dealer must register the product at the time 
of purchase. Registering the product will help the 
company process warranty claims or contact you with 
the latest service information. All claims meeting 
requirements during the limited warranty period will be 
honored, whether or not the product registration card is 
returned. Keep a proof of purchase if you do not 
register your unit.

Customer Note: If the dealer does not register your 
product, please fill out, sign, and return the product 
registration card to Ariens or go to www.ariens.com.

UNAUTHORIZED REPLACEMENT PARTS

Use only Ariens replacement parts. The replacement of 
any part on this vehicle with anything other than an 
Ariens authorized replacement part may adversely 
affect the performance, durability, or safety of this unit 
and may void the warranty. Ariens disclaims liability for 
any claims or damages, whether warranty, property 
damage, personal injury or death arising out of the use 
of unauthorized replacement parts. To locate your 
nearest Ariens Dealer, go to www.ariens.com on the 
internet.

DISCLAIMER

Ariens reserves the right to discontinue, make changes 
to, and add improvements upon its products at any 
time without public notice or obligation. The 
descriptions and specifications contained in this 
manual were in effect at printing. Equipment described 
within this manual may be optional. Some illustrations 
may not be applicable to your unit.

DELIVERY

Customer Note: If you have purchased this product 
without complete assembly and instruction by your 
retailer, it is your responsibility to:

TABLE OF CONTENTS

INTRODUCTION

Serial Number 
Label

Figure 1

OS7330

© Copyright 2006  Ariens Company

Summary of Contents for 939001 ST520E



























Reviews: