EN – 42
Remove Right Axle Bushing
IMPORTANT:
Save all hardware for reinstallation.
1.
Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2.
Disconnect spark plug wire.
3.
Place unit in service position and remove bottom
cover. See
4.
Remove snap clips from axle ends and remove
wheels and axle keys. Take care to not lose axle keys.
Remove left outer flat steel washer from long axle.
6.
Remove E-ring from axle end.
7.
Remove long axle from differential and tractor
housing.
IMPORTANT:
Two inner flat steel washers will fall when
short axle is removed.
8.
Remove outer flat steel washer from short axle.
9.
Support differential gear and remove short axle.
10. Remove differential gear and two inner steel washers.
11. Remove tapping screws securing axle bushing to
frame and remove bushing. See Figure 93.
WARNING:
AVOID INJURY. Before placing unit
in service position, drain fuel from tank and fuel
system. See
Ensure unit is secure and will not tip.
Figure 91
Figure 92
Figure 93
