EN - 25
Unit does not
throw snow or
throws it
poorly.
Shear bolts are broken.
Attachment clutch / brake is not
adjusted correctly.
Adjust Attachment Clutch & Brake
Impeller is frozen in place.
Move unit to a warm place to thaw.
Ice or debris is obstructing auger. Stop engine, remove key and wait for
moving parts to stop. Check for and
remove obstruction before restarting.
Discharge chute is clogged with
snow.
Stop engine, remove key and wait for all
moving parts to stop and for hot parts to
cool. Clean discharge chute and auger
housing with clean-out tool. DO NOT use
your hands.
Auger drive belt is slipping, worn
or damaged.
Adjust or replace auger drive belt. Refer
to the service guide for your unit.
Auger drive belt is loose or
damaged.
Replace belt or adjust auger control
cable. Refer to the service guide for your
unit.
Excessive
snow is left
behind.
Scraper blade is worn or
damaged.
Adjust when worn and replace when
damaged or when blade has been
adjusted down as far as possible and
does not touch ground or clear correctly.
See
Small rubber
beads collect in
frame.
Friction disc wear.
This is normal friction disc wear and no
correction is needed unless there are
chunks or large pieces of rubber collecting
in frame. If repair is needed, refer to the
service guide for your unit.
TROUBLESHOOTING
Problem
Probable Cause
Correction
