EN - 18
Model 915241
SERVICE POSITION
See Figure 11.
Before starting any of the following
maintenance procedures:
1. Park unit a flat, level surface.
2. Stop engine, remove key and wait for all
moving parts to stop and for hot parts to
cool.
3. Move steering levers to neutral position
and rotate handles outward.
4. Engage parking brake.
5. Disconnect spark plug wires from engine.
6. Tip seat forward.
IMPORTANT:
Reconnect spark plug wires
after maintenance.
CHECK SAFETY INTERLOCK
SYSTEM
Check function of the Safety Interlock System
by performing the tests below. Contact your
Ariens dealer for repair if any of the tests fail.
CHECK PARKING BRAKE
1. Place unit in service position. See
2. Set both transaxle bypass levers in the
rear position. See
3. Push unit forward.
• If unit does not move forward, no further
action is needed.
• If unit easily moves forward, adjust the
brake lever. See
CHECK ENGINE OIL
NOTICE:
Engine oil level must be maintained
at correct level or engine damage may occur.
Refer to engine manual.
Description
Qty. Part No.
Transaxle Drive Belt
1
07200724
Mower Belt
1
07200804
Mower Blade
1
04965000
Hydraulic Oil Filter
2
21545100
Hydraulic Oil (32 oz)
AR 00057100
Fuel Filter
1
21548101
Oil Filter
1
21548100
Air Filter
1
21548000
Figure 11
Test Steering
Levers
PTO Parking
Brake
Result
Starting Interlock
1
Neutral
Off
On
Engine
starts.
2
Forward,
Neutral,
Reverse
On
On or
Off
Engine does
not start.
3
Forward,
Neutral,
Reverse
On
or
Off
Off
Engine does
not start.
Operating Interlock (Engine On)
4 *
Forward,
Neutral,
Reverse
On
On or
Off
Engine
shuts off.
5 *
Forward,
Neutral,
Reverse
On
or
Off
Off
Engine
shuts off.
* When operator lifts off seat.
