manualshive.com logo in svg

ARIB 8494B, Manual, Page: 20 / 39

Share
Download
ARIB 8494B Manual Download Page 20

ARIB STD-T91 

-14- 

disconnect the channel when the communication quality is degraded, the judgment may 

be replaced by checking the operating condition of the channel. 

3.6 Antenna 

(1) Antenna structures 

There is no specific provision for the antenna structure. 

(2)  Gain of the transmitting antenna (ORE, Article 49.27)   

Absolute gain of the transmitting antenna shall be 0 dBi or less. However, in the case 

that the e.i.r.p. (Equivalent Isotropic Radiated Power) falls short of the antenna power 

provided in 3.2 (2) added with the transmitting antenna gain of 0 dBi absolute gain, the 

difference may be complemented by adjusting the gain of the transmitting antenna.   

(3)  Gain of the receiving antenna   

There is no specific provision for the gain of the receiving antenna. 

3.7 Others 

(1)  Cabinet (ORE, Article 49.27) 

The cabinet shall be constructed so as to be not be easily tampered with. 

(2)  Mark of usage restrictions (ORE, Article 49.27) 

A mark of the usage restriction that radio waves can be emitted only indoor shall be 

visibly shown on the cabinet. 

(3)  Mark in relation to technical regulations conformity certification (OTRCC, Article 8) 

A mark in relation to technical regulations conformity certification in the specified 

format shall be visibly displayed on the radio equipment. 

(4)  Mark in relation to technical conditions compliance approval for terminal equipment (RTCCA, 

Article 10)   

In case a radio equipment connects to the telecommunication circuit equipment, a 

mark in relation to technical conditions compliance approval for terminal equipment in 

the specified format shall be visibly displayed on it. 

 

Summary of Contents for 8494B








































Reviews:

No comments