Ariafina CXW-310-MC121, Operation & Installation Manual, Page: 40 / 49

39
Hood calibration
Press and hold the button , all button
LEDs flash to indicate initiation of calibration; the
process will last for approximately 5 minutes.
Selection of the hob (gas , induction, or electric)
Press and hold simultaneously the buttons
and : buttons , and
start flashing for 5 seconds.
Within this timeframe, press:
button in case of gas hob
button in case of electric hob
button in case of induction hob
The preselected button remains lit to indicate the
selection was performed, after 10 seconds the
button flashes briefly to indicate that the
performed selection was recorded.
Maintenance
Cleaning
Clean using ONLY the cloth dampened with neutral liquid
detergent. DO NOT CLEAN WITH TOOLS OR
INSTRUMENTS . Do not use abrasive products. DO NOT
USE ALCOHOL!
Panel
Fig. 25-31
Fig. 27a-30a
Attention! Hold the panel with both hands when
dismantling and re-mounting in position to avoid it
falling and causing damage to people or things.
Maintenance of the panel
Dismantling:
pull the panel out decisively and remove it from all the
connecting points.
Cleaning:
the panel should be cleaned with the same frequency
as the fat filters, using a cloth soaked in neutral liquid
detergents.
Avoid the use of products containing abrasives. DO
NOT USE ALCOHOL!
Montage:
The panel should be fixed between the pins placed for
this reason on the surface of the hood.
Attention! Always check that the panel is fixed in its
place well.
Grease filter
Fig. 26-27
Fig. 28-30
Traps cooking grease particles.
This must be cleaned once a month (or when the filter
saturation indication system – if envisaged on the model in
possession – indicates this necessity) using non
aggressive detergents, either by hand or in the dishwasher,
which must be set to a low temperature and a short cycle.
When washed in a dishwasher, the grease filter may
discolor slightly, but this does not affect its filtering capacity.
To remove the grease filter, pull the spring release handle.
Replacing lamps
The hood is equipped with a lighting system based on LED
technology.
The LEDs guarantee an optimum lighting, a duration up to
10 times as long as the traditional lamps and allow to save
90% electrical energy.
For replacement, contact the technical service.