CAT5
Audio
Input
RCA
Output
T
RS
L
al
oc
In
tiv
Ac
e
S krs
p
24VDC
A plif ed Wirel ss Audio Rec iver
m
i
e
e
In
IR
k
Lin
T M
y C
A N N E L V
ION
B
H
I S
T M
y C
A N N E L V
ION
B
H
I S
A r i a
A r i a
2
3
The
WA-350
Point-To-Point Amplified Wireless Audio Receiver and
WA-351
1-To-Unlimited Amplified Wireless Audio Receiver work with Channel
Vision’s WA-320 and WA-321 to create distributed audio systems without
the need for running wires from one room to another. The integrated
100Watt amplifier is ideal for powering distributed audio speakers as well as
wireless home theater applications.
Features:
!
Receive wireless audio from up to 300ft. away
!
100Watt integrated class D amplifier
!
Pre-amp audio outputs for easy connection to powered subwoofer
!
Local audio input to override the wireless audio signal
!
Input for compatibility with Channel Vision’s CAT5 audio systems
!
Easy installation and linking
Rear Panel Features and Connections:
WA-350/WA-351
Top View
WA-350/WA-351
Rear View
Rear Speaker Outputs...
Connect in-wall speakers
to these jacks
RCA outputs...
Connect to powered subwoofer or
external amplifier
CAT5 Audio Input...
Connect the output of your CAT5
audio hub here
J17 & J18 Input Select Jumpers...
Set J17 and J18 to pins 1&2 to
allow primary input from the wireless audio receiver, or to pins 2&3
to allow primary input from the CAT5 audio jack. The wireless audio
and CAT5 audio inputs cannot be used simultaneously.
The front RCA inputs will always function as a local source
override.
Antenna...
Receives RF signal from the transmitter
IR Input...
Connect IR receiver
such as IR-2400 here (optional)
Link Button...
Press to complete the linking
process after the link button has been pressed on
the transmitter
Reset Button...
Press to reset receiver
Power In...
Connect power supply here
Local Audio In...
Line-level
audio sensing input that
overrides the primary
wireless or CAT5 audio
Speaker Outputs...
Connect speakers here
Accessories
Link LED...
Indicates when receiver is linked to a
transmitter
Power Supply
Screws
Speaker Terminal
Connectors
Left & Right Audio Trim Pots...
Control the maximum output
level of the amplifier. If audio
input level is quiet, the trim pots
will have little noticeable effect.
Volume Jumper...
Set J6 to pins 1&2 to
select default power up volume. Set J6 to
pins 2&3 to select previous volume level on
power up. (J7 is currently not implemented)
Keypad Input...
Connect an IR control keypad, such as A0127,
here
Jumper 17 & 18 Locations
J17 Pin 1
J18 Pin 1
24VDC Power Input...
These terminals allow the power supply to
be connected from the rear of the unit. When these terminals are
used, the front power connection should not be used. Follow the
voltage polarity markings on the screw terminals.