Aria 31031 User Manual Download Page 3

INTRODUCTION 

Get ready to enhance your living space with the Aria 2.1-Channel In-Ceiling Speaker 
System. Our in-ceiling subwoofer brings robust sound to any room with its 360-watt peak 
power capacity and its dual voice coils in a left/right configuration. The balanced two-way 
crossover in the sub splits the audio spectrum so the sub only reproduces the bass from 
200Hz and below. This allows the satellites to provide significantly more volume, since they 
only get signals above 200Hz. This means more volume, more coverage, much less 
distortion, and a longer lasting system. 
The system includes two 31032 satellite speakers and a single 31033 subwoofer. The 
subwoofer supports up to four speakers from a single 2-channel amplifier. If additional 
satellite speakers are needed, we recommend purchasing an additional pair of 31032 
speakers. When wired for stereo, the system has a nominal 8 ohm impedance, while when 
wired for mono, it has a nominal 4 ohm load. 
 

FEATURES 

 

Full system includes passive subwoofer and two satellite speakers 

 

Up to four satellite speakers supported per subwoofer 

 

8 ohms nominal system impedance 

 

Can be wired for stereo or monophonic operation 

 

 

Summary of Contents for 31031














Reviews: