PiCUS TMS 3 manual
6
www.argus-electronic.de
Performing measurements with PiCUS TMS 3
Activating the PiCUS TMS 3
The PiCUS TMS 3 is switched on with a magnetic key.
Therefore, the key has to be placed on the marked point
of the PiCUS TMS 3 case for approx. 3 seconds.
Afterwards the TMS 3 App can be started.
The App automatically searches for active PiCUS TMS 3 during start up. If the App is already running,
pressing
REFRESH
will also start a new search for active devices.
After the display refreshes all found PiCUS TMS 3 will be displayed in a sensor-box and then sorted in
a device list. The PiCUS TMS 3 device name and additional information will be displayed.
The sensors status (2nd line) can have the following states:
–
Ready
Standby mode, the PiCUS TMS 3 is waiting for commands
–
Starting measurement
the PiCUS TMS 3 prepares for a measurement
–
Measuring
a measurement is currently under way
–
not connected
the PiCUS TMS 3 is not connected
PiCUS TMS 3 are
automatically
searched during
start up
REFRESH
also starts a
new device search
The sensor-box shows the
sensors name, operation
mode, battery status and
memory consumption.
