Manual GD-25LK01
8 of 13
03.02.2016
4.2.2
Password Setup
Please note that all data on your hard disk will be deleted during
first configuration. Please take an empty hard disk or save your data
before first configuration.
1. Push the buttons „1“ and „3“ at once and connect the enclosure
with your computer. Wait till RED and BLUE LED are lighted and
loose both buttons.
2. Push the “lock” button (The button with the closed lock) for 10 sec.
till the ORANGE LED is lighted.
3. Insert the password. The password must have between 1 to 12
digits.
Choose an, for you, easy to remember password or write down the
password.
There will never be any access to your data without your
chosen password.
Finish the input by pushing the „Unlock“ button (The button with
the open lock).
4. Type your password again and confirm it by pushing the „Unlock“
button.
Now the RED LED will go off and the GREEN LED will light.
The password configuration is finished.
5. Now partition and format your hard disk by using your OS.
In case you don´t know how to do, please ask an expert for help.
Wrong formating or partitioning can delete data on your computer.
4.2.3
Change the password
1. Disconnect the enclosure from computer
2. Push the „Lock“ button and connect the enclosure with the
computer.
3. Hold it for 10 sec till the RED and ORANGE LED will light.
4. Enter the old password and confirm it by pushing the “Unlock”
button.
5. Enter the new password and confirm it by pushing the “Unlock”
button.
6. Repeat step 5
7. Now the RED LED will go off and the GREEN LED will light. The
password is changed successfully.
