Manual GD-25010
26.03.2021
Side
18
of
24
4. Push the HDD carefully in a slight angle into the slot. Then
push the HDD down into the HDD carriage.
You can fix the HDD with screw at the HDD carriage if necessary.
We recommend that if you often carry that enclosure.
5. Put the HDD carriage back into the enclosure and fix the
backside with screws again.
6. The enclosure is ready for use now.
7. Connect the enclosure with your Computer / notebook using
the included USB Type C cable. You can make the
connection also it the Computer/ Notebook is powered on.
8. The hard disk will automatically be shown in your OS now.
If you use a new unformated hard disk you have to format and
partition it first. Mount the hard disk as descriped above and start
the disk management of your computer.
In case you don´t know how to format and partition a hard disk,
1
2