Argus CWS100-AV, Instruction Manual, Page: 2 / 2

MAIN TONE SET
Tone
number
Tone description
DIP switch
configuration:
1,2,3,4 e 5
Tone designation
1 * 800Hz for 500ms, then 1000Hz for 500ms 11101 Warble Tone
2 * 970Hz continuous tone 01011 Continuous tone
3 *
500-1200Hz for 3500ms, then off for 500ms 10101 Slow Whoop (Dutch)
4 *
1200-500Hz swept every 1000ms (1Hz) 00111 German DIN tone
5 2350-2900Hz swept every 333ms (3Hz) 10010 Alternate HF slow sweep
6 800Hz for 250ms, then 960Hz for 250ms 11110 Alternative warble
7 500Hz for 250ms, then 600Hz for 250ms 11100 Alternative warble
8
500-600Hz swept every 500ms (2Hz) 10100 Analogue sweep tone
9 970Hz for 625ms, then OFF for 625ms 10001 Australian Alert (intermittent tone)
10 500-1200Hz sweep for 3750ms, then OFF for 250ms 10110 Australian Evac (slow whoop)
11 800Hz for 250ms, then 970Hz for 250ms 00001 FP1063.1-Telecom
12 554Hz for 100ms, then 440Hz for 400ms 00101 French tone AFNOR
13
2800Hz for 1s, then OFF for 1s 11011 HF Back up interrupted tone
14 2800Hz for 150ms, then OFF for 150ms 11001 HF Back up interrupted tone – fast
15 2800Hz continuous 01001 HF Continuous
16 800Hz for 500ms,then OFF for 500ms 01111 Interrupted tone
17 1000Hz for 250ms, then OFF for 250ms 01101 Interrupted tone medium
18
970Hz for 500ms, then OFF for 500ms 01110 ISO 8201 LF BS5839 Pt 1 1988
19 2850Hz for 500ms, then OFF for 500ms 01100 ISO 8201 HF
20 800Hz for 150ms, then OFF for 150ms 11010 LF Back up Alarm
21 800-950Hz swept every 9ms 01010 LF Buzz
22 800Hz continuous 11000 LF Continuous tone BS5839
23
No sound 11111 Silent
24 500-1200Hz rising for 3000ms, then falling for 3000ms 00000 Siren 2 way ramp (long)
25 500-1200Hz rising for 250ms, then falling for 250ms 00010 Siren 2 way ramp (short)
26 660Hz continuous 00100 Swedish all clear signal
27 660Hz for 150ms, then OFF for 150ms 00110 Swedish Fire signal
28
800-900Hz swept every 1000ms 10111 Sweep tone (1 Hz)
29 800-970Hz swept every 333ms (3Hz) 10011 Sweep tone (3 Hz)
30 800-970Hz swept every 111ms (9Hz) 01000 Sweep tone (9 Hz)
31 (2900Hz for 500ms ON, 500ms OFF) x3, then 1500ms OFF 00011 US Temporal Pattern HF
32
800-1000Hz swept every 500ms (2Hz) 10000 LF Sweep (Cranford tone)
Table 3
ARGUS SECURITY S.R.L. - Via del Canneto, 14 - 34015 - Muggia (TS) - Italy
www.argussecurity.it
* EN 54-3 certified tones
ALTERNATIVE TONE SET
Tone
number
Tone description
DIP switch configuration:
1,2,3,4 e 5
1 800Hz continuous 11101
2 1000Hz continuous tone 01011
3 500-1200Hz for 3500ms, then off for 500ms 10101
4
800Hz continuous 00111
5
2400Hz continuous 10010
6 800Hz continuous 11110
7 500Hz continuous 11100
8 500Hz continuous 10100
9
2400Hz continuous 10001
10 500-1200Hz sweep for 3750ms, then OFF for 250ms 10110
11 500-1200Hz rising for 250ms, then falling for 250ms 00001
12 800Hz continuous 00101
13 2800Hz continuous 11011
14
800Hz continuous 11001
15 2800Hz continuous 01001
16 800Hz continuous 01111
17 800Hz continuous 01101
18 970Hz for 500ms, then OFF for 500ms 01110
19
2850Hz for 500ms, then OFF for 500ms 01100
20 800Hz continuous 11010
21 800Hz continuous 01010
22 800Hz continuous 11000
23 970Hz continuous 11111
24
800Hz continuous 00000
25 800Hz continuous 00010
26 660Hz continuous 00100
27 660Hz for 150ms, then OFF for 150ms 00110
28 800Hz continuous 10111
29
800Hz continuous 10011
30 800Hz continuous 01000
31 2900Hz continuous 00011
32 800Hz continuous 10000
Table 4
info@argussecurity.it L20-CWSVX-0001 (vA.
3
)
LL
TESTING
1) Activate an alarm or evacuate condition at the control panel.
2) Check both the audible and visual activation of the sounder/VAD.
3) Press the SILENCE SOUNDERS button (or equivalent) and ensure all Sounder type devices have silenced before continuing.
4) Reset the system from the control panel.
All devices must be tested after installation and thereafter on a periodic basis as required by local codes.
ACOUSTIC OPERATIONAL PERFORMANCE
ARGUS SECURITY S.R.L. - Via del Canneto, 14 - 34015 - Muggia (TS) - Italy www.argussecurity.it
TECHNICAL SPECIFICATIONS *
Power supply voltage range 15 - 40 Vdc (24 Vdc standard value)
Activated current load range, volume set to HIGH.
Valid for all tones
11 - 25 mA at 24 Vdc
Acoustic emission frequency range.
Valid for all tones
440 - 2900 Hz
Maximum acoustic intensity, volume set to HIGH.
Valid for all tones
100 dB(A) ± 3
Visual Alarm Device (VAD) frequency
0.5 Hz
VAD flash coverage W - 2.5 - 7 (122.5 m 3 )
Tolerated temperature range -10 °C / +55 °C
Maximum tolerated humidity 95% RH (without condensation)
Height (base included) 192 mm
Diameter 130 mm
Weight (base included) 290 g
IP rating (EN 54-3 certified) 33
IP rating (not certified) ** 65
* Consult the latest version of the TDS-CWSXX document for
further information, obtainable from your supplier.
** Independently assessed and certified to IPX5 (not part of the
current EN54-3 certification).
Picture 14
info@argussecurity.it L20-CWSVX-0001 (vA. 3 )
LL
WARNINGS AND LIMITATIONS
Our devices use high quality electronic components and plastic materials that are
highly resistant to environmental deterioration. However, after 10 years of continu-
ous operation, it is advisable to replace the devices in order to minimize the risk of
reduced performance caused by external factors. Ensure that this device is only
used with compatible control panels. Detection systems must be checked, ser-
viced and maintained on a regular basis to confirm correct operation.
Smoke detectors may respond differently to various kinds of smoke particles, thus
application advice should be sought for special risks. Detectors cannot respond
correctly if barriers exist between them and the fire location and may be affected
by special environmental conditions.
Refer to and follow national codes of practice and other internationally recognized
fire engineering standards.
Appropriate risk assessment should be carried out initially to determine correct
design criteria and updated periodically.
WARRANTY
All devices are supplied with the benefit of a limited 3 year warranty relating to
faulty materials or manufacturing defects, effective from the production date
indicated on each product.
This warranty is invalidated by mechanical or electrical damage caused in the field
by incorrect handling or usage.
Product must be returned via your authorized supplier for repair or replacement
together with full information on any problem identified.
Full details on our warranty and product’s returns policy can be obtained upon
request.
ARGUS SECURITY S.R.L.
Via del Canneto, 14
34015 Muggia (TS)
Italy
15
CO0510CPR
EN 54-3:2001+A1:2002+A2:2006
Type B
EN 54-23:2010
CWS100-AV
For use in compatible fire detection and alarm system.
Category rating: W - 2.5 - 7
Duration of operation: Pass
Provision for external conductors: Pass
Flammability of materials: Pass
Enclosure protection: Pass
Access: Pass
Manufacturer's adjustments: Pass
On-site adjustment of behaviour: Pass
Requirements for software controlled devices: Pass
Coverage volume: Pass
Variation of light output: Pass
Minimum and maximum light intensity: Pass
Light colour: White
Light temporal pattern / frequency of flashing: N/A / 0.5 Hz
Marking and data: Pass
Synchronization: Pass
Durability: Pass
Temperature resistance: Pass
Humidity resistance: Pass
Shock and vibration resistance: Pass
Corrosion resistance: Pass
Electrical stability: Pass
0832
Picture 15