manualshive.com logo in svg

Argus 145 Plus, Manual

Share
Download
Argus 145 Plus Manual Download Page 180

11 IP Tests

180

ARGUS 145

 PLUS




<Log>PC>

:

The ARGUS will send the trace file to the 
connected PC, which must be running 
WINplus or WINanalyse. The data will be 
saved in the standard "pcap" format and 
can be decoded with a freeware program 
(e.g. Wireshark). The setting “Data Log” 
must be set to “on” before starting test. In 
Bridge and Router mode, two log files will 
be loaded to the PC, one for the WAN and 
one for the LAN side.

A new single test can be started since the 
xDSL connection and the protocol are still 
setup (to clear the connection down, press 

<Stop>

 in the ARGUS State display).

IP ping – Error messages

If an error occurs, the ARGUS will display 
an error message.

For a description of the error messages, 
please see the appendix.

<Yes>

The ARGUS will save the result 
of the IP ping test in the first 
available memory location in 
the internal memory (see 
page 331).

<Stat.>

Depending on the access 
mode and protocol, the 
ARGUS will display the BRAS, 
IP, PPP, WAN, ATM or LAN 
statistics.

<DSL>

Display 

the xDSL connection 
parameters, trace data, bit 
distribution, signal to noise 
ratio for each tone etc.

<New>

Start a new IP ping test 

Summary of Contents for 145 Plus










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands