17 Test Reports
ARGUS 145
PLUS
331
17.1 Saving Test Reports
The results of a test can be saved when a
test is completed or when closing a display
showing test results.
The ARGUS saves the test result in the
first available memory location. If the
memory is full, you must manually select a
memory location to be overwritten.
As names for the memory locations, the
ARGUS will suggest either AMP_1,
AMP_2, AMP_3 etc. or the call number
entered as the "Own number“ in the
speed-dialing memory (see page 339).
The name shown can accepted or a new
one can be entered using the keypad:
When the right softkey is pressed, it
assumes a different meaning and thus
influences the entries made from the
keypad:
<12>ab>
entry of the digits 0 to 9 plus *
and #
<ab>AB>
entry of the lowercase
characters and @, /,- and .
(e.g. to enter a “c” press the
“2” on the keypad three times)
<AB>12>
entry of the uppercase
characters and @, /,- and .
<Del.>
Delete the character before
the cursor
Move the cursor
Do not save the results;
return to the previous display.
Store the result
