Assembly Instructions
14
Step
19
Drill the handle holes
in the door
Important:
Please follow
these instructions
carefully.
Lay the doors and
. down onto a smooth
surface.
Important:
Carefully
choose which holes you
need to drill.
This will depend on
which side or
you fitted the hinge
plates .
Check that the holes and
hinges are in the same
place as the diagrams.
Using the pilot hole in
the rear face of the door,
drill through the holes
indicated opposite, using
a 2.5mm diameter drill.
Turn the door over and
open out the 2.5mm
holes that you have just
drilled by drilling back
through them with a
5mm drill.
Note:
Drill bits are not
provided.
Fit a soft close fitting
onto the 1 hinge shown
on each door.
Push the hooks on the
soft-close fitting into the
holes on the hinge and
then press down to click
into place.
7
8
2
L
1
Important
ONLY drill the
2 holes in each
door shown
here if you
have fitted the
hinges to the
RIGHT side.
7
8
PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY
TO CHOOSE WHICH 2 HOLES YOU WILL NEED TO DRILL
If you have
fitted the
hinges on the
LEFT side,
go to the
previous step.
7
8
Small piece of
waste wood
N
Note:
We recommend
the use of a small piece
of waste wood, placed
behind the hole while
drilling, to reduce the
possibility of any
breakout.
N
DO NOT drill
any other holes
ONLY drill
these 2 holes
DO NOT drill
any other holes
ONLY drill
these 2 holes
N
Summary of Contents for Valencia 194/7605
Page 20: ...ALR2657 ...
