Assembly Instructions
17
Step
27
Fit the back
Lay the unit back
down for this step.
a:
Square up the unit by
making sure that
measurement
x to x
equals y to y.
b:
Place the back
onto the unit.
Nail around the
outside edges of the
back .
Note:
Nails should
be spaced about 150mm
apart.
Stand the unit up for
the next step.
19
E
The measurement from top corner X to bottom corner X must be
equal to the measurement from top corner Y to bottom corner Y
a:
19
19
b:
E
y
y
x
Step
28
Warning:
The
unit is heavy.
Lift with care.
1
x
Fit the overbalance
protector
To prevent possible
overbalancing we
recommend that this unit
is secured to a suitable
wall by use of the
overbalance protector kit
. fitted to the unit or, an
alternative fixing method
of your choice.
Wall fixings are not
supplied as they will
need to suit the wall
type.
Note:
Take care when
drilling the wall that you
do not drill into any
pipes, wires etc.
If in doubt, consult an
expert.
Q
Attach the
strap to the unit
Attach the
strap to the wall
Wall fixing
(not supplied)
Washer
Strap
Strap
Washer
Washer
Screw
Q
Q
Example
Screw
(not supplied)
