Assembly Instructions
12
Step
18
Polystyrene
block
Polystyrene
block
a:
Fit the small rail
a:
Position the small rail
. up against the 2
holes in the divider .
b:
Tap a double metal
dowel through the
divider and into the
small rail until it
‘’bottoms out’’.
Tap a large wooden
dowel through the
divider and into the
small rail until it
‘’bottoms out’’.
c:
Use a screwdriver to
tighten the large locking
nut fitted to the small
rail .
7
7
15
15
X
T
B
15
7
7
Note:
Support the
small rail until the
right side has been
fitted in the next step.
X
T
b:
c:
X
T
15
7
Step
19
Fit the right side
Note:
To make the
assembly easier, place
polystyrene blocks from
the packaging
underneath the base,
divider and large shelf to
raise the assembly.
Push the right side
onto the assembly.
Use a screwdriver to
tighten the 3 large
locking nuts fitted to
the base and the
small rail .
14
B
17
7
14
17
7
