y
Assembly Instructions
Step
14
Step
15
J
Secure unit to a wall
To prevent possible
overbalancing we
recommend that this unit
is secured to a suitable
wall by use of the metal
bracket fitted to the
top .
Fixings are not supplied
as they will need to suit
the wall type, and the
length of screw will
depend on the distance
of the back of the unit to
the wall.
Warning:
Take
care when
drilling the wall that you
do not drill into any
pipes, wires etc. If in
doubt, consult an expert.
3
J
3
WALL
WALL
Top of unit
J
b:
Fit the back
a:
Square up the unit by
making sure that
measurement
x to x
equals y to y.
b:
Place the back
onto the unit.
Nail around the
outside edges of
the back .
Note:
Nails should
be spaced about
150mm apart.
Stand the unit up
for the next step.
9
G
The measurement from top corner X to bottom corner X must be
equal to the measurement from top corner Y to bottom corner Y
a:
9
y
x
G
Warning:
The
unit is heavy.
Lift with care.
y
x
9
9
Summary of Contents for Malibu Tall Unit 833/7115
Page 16: ...ALR2869...
