y
y
x
x
Assembly Instructions
Use 2nd hole in from front of
Runner F1004 to fit 1st F73 then
fit other F73 to match other hole.
Rebated Edge
F73
COVERED EDGE
Use 2nd hole in from front of
Runner F1004 to fit 1st F73 then
fit other F73 to match other hole.
F1004
When you insert F900,
make sure the arrow is
pointing towards the hole
in the edge of the panel.
F900
F73
F1004
COVERED EDGE
If you need help or have damaged or missing parts, call the
Customer Helpline: 08456 400800
and quote the reference numbers on the component pages.
Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW
10
Fit back panel
a:
Square up the unit by
making sure that
measurement
x to x
equals y to y.
b:
Place the back
down onto the unit, as
shown.
Use the nail guide to
hold the nails vertical
and at the correct
distance whilst you nail
around the top and sides
of the back .
Note:
Nails should
be spaced about 150mm
apart.
Stand the unit up for
the next stage.
y
y
x
x
12
12
C
D
12
C
D
Assembly is complete
Insert drawer
Lift front of drawer whilst
inserting to overcome
the ‘stop’ system.
Note:
To ensure that
your drawer runs
smoothly, spray a small
amount of furniture
polish into the grooves.
C
D
12
Step
15
Step
16
The measurement from top corner X to bottom corner X must be
equal to the measurement from top corner Y to bottom corner Y
Fit doors and handles
2 people are needed
here
Note:
The easiest way to
attach the door is to
fit the top hinge first,
then align and fit the
other hinges.
a:
Push the hinge
onto the front part of the
hinge plate .
b:
Keep the hinge
FLAT against the hinge
plate as you slide it
across as far as it will go.
Tighten screw A.
c:
The hinge must be
flat against the hinge
plate prior to any
adjustment.
d:
The hinge must
NOT be AT AN ANGLE
to the hinge plate
when assembled.
This would indicate that
the recess at the bottom
of screw B had not
located in the slot in the
hinge plate and the hinge
would not be secure.
Remove the hinge from
the hinge plate and then
re-assemble being
careful to follow
instructions a-c.
e:
Attach a handle to
the door using 2
screws .
Note:
Do not
overtighten screw .
a:
b:
Summary of Contents for Malibu 305/0208
Page 12: ...ALR2443...
