Assembly Instructions
4
If you have damaged or missing components, call the
Customer Helpline: 08456 400800
quoting the reference
numbers below
Step
1
B
F
F
Prepare the drawer
front
Screw 2 metal dowels
into the holes shown on
the back of the drawer
front .
Note:
Tighten metal
dowels up fully against
the panel.
B
8
Prepare the drawer
sides
Insert a small locking
nut into the hole
shown on the left drawer
side and right drawer
side .
Note:
The arrow on the
locking nut
must
point
towards the hole in the
edge of the panel.
F
9
10
Assemble the drawer
sides and back
Fit the left drawer side
and right drawer side
to the drawer back
using 4 knock-in pegs
L
9
10
11
Step
2
Step
3
L
L
L
L
F
9
10
9
10
11
B
B
B
B
8
Small grooves
on the inside
Fit the drawer back
Fit the drawer back
down onto the drawer
base .
Make sure that the
drawer base fits into
the groove in the drawer
back .
Hold the drawer back
in position and tap the
knock-in pegs
through the holes in the
drawer sides and .
.
Note:
Due to the manufacturing process, the holes for the
locking nut can be on either surface of the drawer sides.
Note:
The locking nuts can be on
either surface of the drawer sides.
Make sure that the small groove
is on the inside, as shown.
?
Step
3
Attach the drawer
sides to the drawer
front
Push the left drawer side
. and right drawer side
. onto the back of the
drawer front .
Turn the small locking
nuts on the left
drawer side and right
drawer side .
Note:
Turn the locking
nuts clockwise to
secure panels - more
than 1/2 a turn.
9
10
8
F
F
9
10
B
B
D
6
Small groove
7
8
Note:
The locking nuts can be on
either surface of the drawer sides.
Make sure that the small groove
is on the inside, as shown.
x 2
B
B
F
Small groove
8
9
10
