36
Starting with the bottom Left-Hand Drawer, slide both of the Runners forward and locate the
Drawer Sides between them, lining up the holes in the Drawer Sides with the 2nd 'threaded'
holes in the Runners.
Working from the inside of the Drawer, insert 2 Screws through the Drawer Sides and out into
the 2nd threaded hole in the Runner.
Note:
Do not overtighten the Screws.
If they catch on the runner you may need to loosen them slightly.
www.youtube.com/watch?v=yG4xtiJJeSg
Fitting Ball Bearing Runners
K
x 6
7
7
7
1st
2nd
3rd
7
Left-Hand
Drawer Front
Warning:
Use a Screwdriver
to position the Runners as
they could have sharp edges
Summary of Contents for Home Jenson 920/5679
