background image

 

 

IMPORTANT SAFEGUARDS 

Before using the electrical appliance, the following basic 
precaution should always be followed including the following. 
1.

 

Read all the instructions. 

2.

 

Before use, check that the voltage of your wall outlet 
correspond to the rated voltage manner. 

3.

 

Do not operate the appliance with a damaged cord or after 
malfunction or has been damaged in any manner. 

4.

 

If  the supply cord is damaged, it must be replaced by the 
manufacturer or its service agent or a similarly qualified 
person in order to avoid a hazard. 

5.

 

Do not let cord hang over edge of table or counter or touch 
hot surface. 

6.

 

The use of accessory attachments not recommended or sold 
by the appliance manufacturer, may cause hazards or result 
in fire. 

7.

 

Do not immerse the main body, cord or plug in water or 
other liquid as this would give rise to electric shock. 

8.

 

Do not touch hot surface. Use handles or knobs only. 

9.

 

Close supervision is necessary when your appliance is 
being used near children or infirm persons. 

10.

 

Do not place an appliance on or near a hot gas or on a 
heated oven. 

11.

 

Never eject beaters or hooks when the appliance is in 
operation. 

12.

 

Ensure fingers are kept well away from moving beaters. 

13.

 

Remove beaters or hooks from mixer before washing. 

14.

 

Avoid contact with moving parts. Keep hands, hair and 
clothing as well as cooking utensils away from beaters 
during operation to reduce the risk of personal injury and/or 
damage to mixer. 

 

1

Summary of Contents for hand mixer











Reviews: