Assembly Instructions
Step
14
10
Fit the 2 overbalance
protector kits
Important:
A bracket
must be fitted
on both
sides of the unit and they
must be at least 25mm in
from the end panels.
To prevent possible
overbalancing this unit
must be secured
to a
suitable wall by fitting of
the 2 overbalance
protector kits to the
unit, or an alternative
fixing method of your
choice.
Wall fixings are not
supplied as they will
need to suit the wall
type.
Note:
Take care when
drilling the wall that you
do not drill into any
pipes, wires etc.
If in doubt, consult an
expert.
Assembly is complete
E
WARNING!
In order to prevent overturning
this product must be used with the
2 wall attachment devices provided
E
Underside
of top
25mm
x 2
