TOUCH LAMP
FIXING INSTRUCTIONS
Thank you for buying this quality light fitting. Please read these instructions carefully prior to installation and retain
them for future reference.
THIS PRODUCT IS FOR INDOOR USE ONLY
.
This product is only suitable for connection to a 220-240V~ 50Hz supply and in accordance with I.E.E. Wiring
Regulations.
If in doubt we recommend you consult a qualified electrician.
SAFETY
This fitting is double insulated and must not be earthed. If in doubt, we recommend you consult a qualified
electrician.
This product is supplied complete with a 3-amp fuse plug. Our products should not be modified. If any modification is
made, including tampering with the plug, it will invalidate the warranty and may render the product unsafe.
The symbol
on the product indicates that the lamp head must be at least 0.3m (30cm) from
the lit surface.
THIS PRODUCT CAN GET EXTREMELY HOT DURING USE. CAUTION MUST BE TAKEN WHEN MAINTAINING, ADJUSTING
OR CLEANING THE LUMINAIRE
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE RECYCLE
WHERE FACILITIES EXIST. CHECK WITH YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.
TO OPERATE:
TOUCH THE FIRST TIME FOR A LOW LEVEL LIGHT
TOUCH AGAIN FOR A MEDIUM LEVEL LIGHT
TOUCH A THIRD TIME FOR A HIGH LEVEL LIGHT
TOUCH THE FOURTH TIME TO SWITCH OFF
REPEAT EACH STEP TO SELECT LIGHTING LEVEL AS REQUIRED
ASSEMBLY INSTRUCTIONS
1.
Please note: Do not plug in the lamp until after assembly.
2.
Carefully unpack the lamp and put it on a soft and flat surface
3.
Screw the shade on the lamp holder with ring tightly.
4.
Place the bulb ( BC Max.60W, not included) into the lamp holder.
5.
Plug in the lamp. Then switch on/off the lamp with on-off switch.
6.
Carefully place the lamp in the desired location.
BULB REPLACEMENT
1. Switch off the main power supply.
2. Before replacing the bulb, allow it to cool down for at least 10 minutes.
3. Never touch the bulb with your fingers directly, cover it with a cloth.
4. Loosen the bulb and remove it from the lamp.
5. Replace a new bulb with same voltage and wattage.
CAUTION
1.
Indoor use only.
2.
Connect to 220 - 240V, ~ 50Hz.
3.
If in doubt about fitting this product, please consult a suitable qualified electrician.
4.
The temperature of the luminaire rises very quickly.
5.
Do not touch the metal parts or glass of the shade after the light is turned on.
6.
The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire
shall be destroyed.