Small piece of
waste wood
Small piece of
waste wood
Assembly Instructions
Step
37
a:
b:
Drill 2 handle holes in
each of the doors
Important:
Please follow
these instructions
carefully.
Lay the 2 doors
down onto a smooth
surface.
Check that the glides
and holes are in the
same place as the
diagrams.
Note:
We recommend
the use of a small piece
of waste wood, placed
behind the holes while
drilling, to reduce the
possibility of any
breakout.
Using the pilot holes in
the rear face of the door,
drill through the 2 holes
indicated opposite, using
a 2.5mm diameter drill.
Turn the door over and
open out the 2.5mm
holes that you have just
drilled by drilling back
through them with a
5mm drill.
IMPORTANT
Carefully choose which 2 holes
you need to drill in each door
17
Buffer bracket
is on this door
ONLY drill these 2 holes
in the right hand door
ONLY drill these 2 holes
in the left hand door
17
17
23
