Argos Canterbury 3 DR Robe, Assembly Instructions Manual

Page: 8 / 27

Place drawer runners
1.
Extend drawer glide
41434 .
2.
Attach drawer glide at the
front of side panel
FA .
Place screw 26020
through the correct hole
at the front of the drawer
glide, into the holes on
the side panel
FA .
Tighten screw but do not
overtighten.
3.
Open slide until 3 holes
is visible at back of
drawer glide.
4.
Place screw 26020
through the correct holes
at the back of the drawer
glide, into the holes on
the panel
FA .
Tighten screw but do not
overtighten.
5.
Attach the fl at head
screw
25233 into the
correct holes of the
drawer glide, into the
side panel
FA .
Tighten screw but do not
overtighten.
Repeat these 5 steps for
the remaining runners.
5
Assembly Instructions
Step 5
Fittings you will need for this step:
Drawer runner
# 41434 X2 Flat head screw
# 25233 X2 Flat head screw
# 26020 X4
Front
Front Front
Front
Front
Front
1.
FA
FA
2.
3.
4.
5.
x1
x1
x1
7