21
Assembly Instructions
Step
31
Attach bracket to top
To prevent possible
overbalancing, we
recommend that this unit
is secured to a suitable
wall by use of the
bracket fitted to the
top of the unit.
Fixings are not supplied,
as they will need to suit
the wall type and the
length of screw will
depend on the distance
from the back of the unit
to the wall.
Fit the bracket loosely
onto the top of the unit,
fixing screw between
10-15mm in from the
back edge, and mark the
wall for the wall fixing.
Swivel the bracket
away from the wall and
drill a hole in the wall
using a suitable drill bit
and fit your wall fixing.
Swivel the bracket
back and fix the bracket
to the wall, then tighten
Screw .
Note:
Take care when
drilling the wall that you
do not drill into any
pipes, wires etc.
If in doubt, consult an
expert.
Warning:
The
unit is heavy.
Lift with care.
K
K
J
K
K
J
WALL
WALL
Back of Unit
K
J
K
10-15mm
Top of Unit
Summary of Contents for Camden 259/3773
Page 24: ...ALR2987...
