background image

 Wall Mounting & Fixings

Generally aerated blocks should not 
be used to support heavy loads, use 
a specialist ftting in this case. For light 
loads, general purpose wall plugs can 
be used. 

For use with heavier loads such as TV 
& HiFi speakers and satelite dishes etc.

For use with plasterboard partitions or 
hollow wooden doors.

For use when ftting or supporting 
heavy loads such as shelving, wall 
cabinets and coat racks.

For use with walls stuck with 
plasterboard. The hammer fxing allows 
it to be fxed to the wall rather than the 
plasterboard. Always check the fxing 
is secure to the retaining wall.

For  use when attaching light loads on 
to plasterboard partitions.

When drilling into walls always 

1: General rule:

Always use a larger screw and wall plug 

if you are not sure.

2: Ensure you use the recommended drill bit to match the wall 

plug and hole size.

3: Ensure you drill the hole horizontally, do not force the drill or 

enlarge the hole.

4: Take extra care when drilling high walls, ceilings and ceramic 

tiles. Ensure wall plugs are inserted beyond the thickness of  
the ceramic tiles to avoid the tiles splitting or cracking.

5: Ensure wall plugs are well ftted and are a tight ft in the 

drilled hole.

If plastic wall plugs 
are supplied with your 
product:

Make sure that the screws and wall plugs being used 
are suitable for supporting your unit. Consult a qualifed 
tradesperson if you are unsure.

- these are only suitable for 
use in masonry walls. 

If you are in any doubt about 
the correct wall plugs for 
your wall, seek professional 
advice.

Failure of the product due to 
using incorrect fxings is the 
responsibility of the installer.

No.1

Important:

check that there are no hidden wires or pipes etc. 

Important note:

A Guide to -

Hints:

"General Pourpose" wall plug

"Cavity Fixing-Heavy Duty"

wall plug

No.4

No.2 "Plasterboard" wall plug

No.3 "Cavity Fixing" wall plug

No.5 "Hammer Fixing" wall plug

"Shield Anchor" wall plug
Heavy loads

No.6

Types of walls

You can use one of the following types of wall plug if your walls are made 
of brick, breeze block, concrete, stone or wood.

Safety:

Fitting:

Care & 
Maintenance

Always check the ftting 

and location to ensure your safety 
in and around the home.

From time to time check 

the ftting to ensure the wall plugs 
or screws do not become loose.

14

Summary of Contents for Baby Amelie 226/1380
















Reviews: