Finished
front edge
Prepare the left end
Refer to step 1 and,
if
you have chosen to fit 1
hanging rail or, an
internal chest or, a
shelf pack
, screw 2
metal dowels into the
left end .
Note:
Tighten the metal
dowels up fully against
the panels.
Note:
If you have
purchased a shelf pack,
do not fit the rail holder.
To fit the rail holder ,
screw through its top
hole with screw and
into the shallow mark
hole drilled in the left end
. . Make sure that it is
fitted straight, in line with
the panel edges and
then fit another screw
Assembly Instructions
4
If you have damaged or missing components, call the
Customer Helpline: 08456 400800
quoting the reference
numbers below
Are you fitting 1 or 2
Hanging Rails or, an
Internal Chest or, a
Shelf Pack?
Step
1
Step
2
The fixed shelf will
need to go here if
you are fitting the
following:-
Only 1 Hanging Rail
or
An Internal Chest
or
A Shelf Pack
Follow Steps
2 and 3.
Only follow Steps 2 and 3 if you are only fitting
1 hanging rail or, an internal chest or, a shelf pack.
If you are fitting 2 hanging rails, follow Step 4 and 5.
The fixed shelf
will need to go
here if you are
fitting the
following:-
2 Hanging Rails
Follow Steps
4 and 5.
J
K
J
K
B
K
J
B
B
1
1
B
K
1
J
Note:
If you have purchased a shelf pack,
do not fit the rail holder.
