Assembly Instructions
4
If you have damaged or missing components, call the
Customer Helpline: 08456 400800
quoting the reference
numbers below
Step
1
Finished
front edge
Prepare the left end
Refer to step 1 and,
if
you have chosen to fit 1
hanging rail
, screw 2
metal dowels into the
left end .
Note:
Tighten the metal
dowels up fully against
the panels.
To fit the rail holder ,
screw through its top
hole with screw and
into the shallow mark
hole drilled in the left end
. . Make sure that it is
fitted straight, in line with
the panel edges and
then fit another screw
using the lower hole.
Are you fitting 1 or 2
hanging rails or, a
shelf pack?
Step
2
If you are just
fitting 1 hanging
rail, the fixed
shelf will need
to go here.
Follow Steps 2
and 3.
Only follow Steps 2 and 3 if you are just fitting 1 hanging rail.
If you are fitting 2 hanging rails, follow Step 4 and 5.
If you are fitting 2
hanging rails, the
fixed shelf will
need to go here.
Follow Step 4
and 5.
J
K
J
K
B
K
J
B
B
1
1
B
K
1
J
If you are just
fitting 1 hanging
rail, the fixed
shelf will need
to go here.
Follow Steps 2
and 3.
There is an option of
inserting an Internal
3 Drawer Chest into
your Robe
If you are fitting 2
hanging rails, the
fixed shelf will
need to go here.
Follow Step 4
and 5.
There is an option of
inserting an Internal
3 Drawer Chest into
your Robe
