manualshive.com logo in svg

Argos Alicia 145/1256, Assembly Instructions Manual

Share
Download
Argos Alicia 145/1256 Assembly Instructions Manual Download Page 12

Assembly Instructions

11

If you need help or have damaged or missing parts, call the 

Customer Helpline: 08456 400800

and quote the reference numbers on the component pages.

Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW

ALR2941

Step

 

14

Top of Unit

WALL

WALL

Back of Unit

Fit the bracket

To prevent possible 

overbalancing, we

recommend that this unit 

is secured to a suitable 

wall by use of the 

bracket      fitted to the 

top of the unit.

Fixings are not supplied, 

as they will need to suit 

the wall type and the 

length of screw will 

depend on the distance 

from the back of the unit 

to the wall.

Fix the bracket      

loosely onto the top of 

the unit using screw   

and mark the wall for the 

wall fixing.

Swivel the bracket    

away from the wall and 

drill a hole in the wall 

using a suitable drill bit 

and fit your wall fixing.

Swivel the bracket    

back and fix the bracket 

to the wall, then tighten 

screw     .

Note:

 

Take care when 

drilling the wall that you 

do not drill into any 

pipes, wires etc.

If in doubt, consult an 

expert.

Warning:

 The 

unit is heavy. 

Lift with care.

Assembly is complete

I

I

E

I

I

E

I

E

I

I

Summary of Contents for Alicia 145/1256













Reviews:

No comments

Brands by name

Popular brands

Load more brands