b:
b:
Use the pegs
0
to secure
the other end of the guy rope to
the ground (insert at an angle).
a:
Attach the end of each guy
rope
e
to a 'D' ring at each
corner of the canopy cover.
Attaching the guy ropes
Note:
At least 2 people are
required for this procedure.
Step 3
Fitting the legs
a:
Secure the Gazebo
m
to the
ground at each comer. Insert a
peg
0
through the hole in each
frame leg into the ground (insert
at an angle).
Take care not to bend the pegs,
use a rubber mallet to help
insert if required.
Step 4
b:
Attach the hooks on the end
of the canopy legs to the holes
at the end of the frame legs, the
canopy cover can be tightened
by moving the hooks to a lower
f)oIe.
./r\.
Caution:
ill
Do not over tighten the
guy ropes as this can
damage the fabric seams.
C:
The length of the guy ropes
e
can be adjusted by feeding
the rope through the tensioner.
Remove any slack from the
guy ropes by holding the lower
end ofthe rope and sliding the
tensioner up towards the tent.
5
