5
Assembly Instructions
Step 3
3
Extending the legs and
secure the canopy
b:
Attach the hooks on the
end of the canopy legs to
the holes at the end of the
frame leg,the canopy
cover can be tightened
by moving the hooks to
a lower hole.
a:
Pull and extend each
leg until the spring clips
engage into the hole in
the outer tubes.
C:
close the velcro tape
as shown in diagram c.
Warning:
the velcro tape
must stretch tight as this
could cause rain water to
collect on the canopy and
a hazard.
c:
1
2
Note:
There are two
spring clip location holes
in each leg, using the
holes can adjust the height
of Gazebo.
Hook
a:
b:
Spring clip
Leg