5
Assembly Instructions
D
D
D
Note:
Insert metal
dowels as far as shown.
Do not over tighten.
Repeat Step 2 and
Step 3 on Left side
panel .
as shown.
Screw metal dowels
Turn the Right side panel
upside down.
Firmly push Back panel
and Cross rails
onto Right side panel
, make sure the
Wood and metal dowels
enter corresponding
holes.
into Right side panel
2
2
2
2
2
4
4
4
3
3
1
Firmly push Small wood
dowels into indicated
holes.
Step
3
Step
4
D
Note:
Tighten all cams
in this way.
Note:
Longer
leg of the cross
on the Metal
Cams must face towards
end of panel (as shown).
Then, using a Philips
Screwdriver, screw all
Metal Cams
clockwise
until they are ‘hand tight’.
F
Long leg.
Taped edge
face upwards.
E
F
E
Insert Large metal cams
into the holes on
Back panel and the rails
so that they are flush.
F
