Assembly Instructions
4
If you have damaged or missing components, call the
Customer Helpline: 08456 400800
quoting the reference
numbers below
Step
1
4
Step
1
B
B
B
7
Step
2
Prepare the drawer
front
Screw 2 metal dowels
into the holes shown on
the back of the drawer
front .
Note:
Tighten metal
dowels up fully against
the panels.
B
7
Prepare the drawer
sides
Insert a small locking
nut into the hole
shown on the left drawer
side and right drawer
side .
Note:
The arrow on the
locking nut
must
point
towards the hole in the
edge of the panel.
Step
3
F
8
9
Attach the drawer
sides to the drawer
front
Push the left drawer side
. and right drawer side
. onto the back of the
drawer front .
Use a screwdriver to
tighten the 2 small
locking nuts fitted to
the left drawer side
and right drawer side .
Note:
Turn the small
locking nuts as far as
they will go - more than
1/2 a turn.
8
9
7
F
F
8
9
F
B
B
F
7
Small groove
9
Note:
Due to the manufacturing process, the holes for the
locking nut can be on either surface of the drawer sides.
Note:
The locking nuts can be on
either surface of the drawer sides.
Make sure that the small groove
is on the inside, as shown.
F
F
8
9
9
8
